The Cheapest 3D Printer (So Far...)

Ding, ding, ding...  In fight to be the lowest has a new contender.  MakiBox starting shipping it's A6 LT model in the beginning of August with its first 5 units.  Check out the details below.

The MakiBox A6 LT has been designed to be the best of both worlds, affordable and dependable. It comes with a frosted acrylic printing bed that is suitable for PLA and similar lower temperature plastics. All MakiBox kits come partially assembled. They have been designed to be more simple with less parts and very little configuration.

Specs:

Outside Dimensions: 290mm wide x 235mm deep x 235mm tall
Printing Output: 150mm wide x 110mm deep x 90mm tall
Positional Resolution: 0.04mm (full step resolution) in XYZ, output resolution depends on output speed and nozzle size.
Movement System: Drive Screws (8mm movement per rotation) and Stepper Motors
Nozzle: 0.4mm Default, 0.3mm and 0.5mm available
Drive Electronics: Printrboard Rev B with MakiBox Firmware

Kit contains:

1 MakiBox A6 Frame
4 Stepper Motors with Drive Shafts
1 Controller Board
1 60W or higher power supply (100V-220V AC)
1 Hot End with 0.4mm diameter output
1 Acrylic Print Bed
1 Clear Acrylic Casing
0.5kg of PLA 1.75mm Filament, Assorted Color
Assembly Instruction Manual

Now get ready for this...  The price is only $200!!!!  The next closest 3D printer is The Buccaneer at $347 which is currently a Kickstarter project that (to my knowledge) is not yet in production.

To my knowledge this is the lowest priced 3D printer in production.

Who will be the next contender?

Stay tuned....